GARAGE DOOR REPAIRS & SERVICE OCEAN BEACH, CA
Call (619) 800-8575 for a Free Estimate

Save Money with a Garage Door Repair!

Often times your garage door needs a simple adjustment and we can walk you through the process of repairing it over the phone....Saving you money. Give us a call for a free estimate we can usually determine what your problem may be after a few questions and give you a quote over the phone.
The most common garage door repairs are broken torsion spring, busted cables, bent panels, stripped motor trolleys(genie) and stripped gears in liftmaster motors .
We can also service your existing garage door or motor if its noisy or not running smooth. Most times we can get your garage door or motor running like new with some adjustments.

Garage Door Service Includes:

• Checking the Door Balance and Adjusting the Torsion Springs (if needed )
• A thorough check of all parts including rollers, hinges, bolts, back hangs
• We check the torsion springs- to make sure they are in good condition.
• Lubrication of all Parts.
• We inspect the Garage Door Motor and make the nessary adjustments.
Such as adjust the limit switches, checking the force adjustment
( to make sure your door will reverse if it hits something)

We Repair: Broken Springs, Bent Panels, Broken Cables, Doors that rub on the jam, striped motor trolleys, worn out gears, unbalanced doors, replace rollers, replace hinges......etc.

Get your Garage Door Fixed by a Pro.
CALL TODAY: 1-619-800-8575

• Garage Door opens up half way then stops: You may have a broken torsion spring the reason your garage will not go up all the way is because the torsion Spring is what does all the heavy lifting. But sometimes the opener is strong enough to lift the garage door with one spring. I've actually been to a few repair jobs where both springs where broken and the customer had been running the door like that. If the springs are broken do not open the door with the motor you may cause damage to the motor. Often times the If the Springs are not broken then it may be that your torsion springs may need to be adjusted. Or sometimes its as simple as doing a force adjustment on your motor.

• Garage Door Opener sounds like it works but nothing happens: When this happens it's usually a stripped trolley (usually on a genie) or the internal plastic gears (Chamberlin Liftmaster). Sometimes it may be as simple as your garage door openers manuel release being pulled down. So you might want to check and make sure its engaged first.

• Garage Door does not go down all the way(comes down a little then goes up): Its usually the garage door safety beams make sure they are properly aligned. (usually there will be a solid light on both beams if there is a good connection(some beams only have one indicator light)......make sure there is nothing in between them (like spider webs). Inspect the wiring leading up to the beam sometimes you can wiggle the wire and make the beam work again. Make sure that the door is not hitting anything on the way down.
• Spun Cable: the solution is to fix whatever caused the cable to come loose and reset the cables and torsion springs.

• Bent or Cracked Panel: If you catch a crack in the panel early enough before it completely makes your panel bend in half you can have a extra strut put on for reinforcement to keep it from buckling. This can save you from having to buy a new panel or a whole new door as sometimes on older doors the manufacterer has gone out of business or does not make that particular model anymore.